Application:
- Apply a very thin coat across entire piece with a lint-free cloth at room temperature.
- Allow Danish Oil Finish to penetrate for a minimum of 5 minutes.
- Important! Rub in briskly with a lint-free cloth until the surface is completely dry.
- Allow the piece to cure for a minimum of 8 hours.
- Burnish with a soft cloth or #0000 steel wool. The more you rub the better it will look.
- Additional coats will deepen the shine and increase protection. We usually recommend 3 to 4 coats.
DANGER OF COMBUSTION Keep out of reach of children. Materials such as rags used with this product may begin to burn by themselves. After use, put rags in water or lay flat to dry, then discard.
