LX-20™ HVLP Compressor Spray Gun by Fuji Spray

4/5 · 1 review
from $395.00
Free Delivery
Quebec, Ontario · More info

LX-20™ HVLP Compressor Spray Gun is available in gravity feed and pressure feed models.

Featuring a nearly 13" wide fan pattern and an enhanced HVLP air cap design, the LX-20™ and its optimized air passages will decrease time in the spray booth and increase productivity.

Easily adaptable to leading disposable cup systems, the LX-20™ is compact, lightweight and easy to maintain. The LX-20™ features a unique comfort grip that reduces operator fatigue allowing you to spray for extended periods of time.

  • Designed for fine-finishing applications
  • High transfer efficiency means less overspray and increased savings
  • Optimized air cap design results in soft spray pattern and outstanding atomization
  • Perfect for any type of professional spray finishing
  • 100% stainless steel fluid passages suitable for water-borne and solvent-based coating
  • Recommended airflow and pressure: 15.2cfm at 26psi

3 Air Cap Sets Included

All LX-20 spray guns are installed with 1.4 mm air cap set, 2 extra air cap sets are included (1.2mm & 1.7mm)

Additional air cap sets also available.

High-Pressure Regulator Gauge Included

High-Pressure Regulator Gauge included with all LX-20 spray guns.

Compatible with 3M PPS Cup System

LX-20 gravity feed spray gun is also compatible with 3M™ PPS™ Series 2.0 System Kits.

Compatible with Fuji Spray Pressure Pots

LX-20 gravity feed spray gun is compatible with Fuji Spray 2 quart and 2.5 gallon pressure pots.

The Fuji LX-20™ is a general purpose HVLP spray gun perfect for all types of professional spray finishing. It can handle with ease all types of coatings including high solid materials. This spray gun is designed for use in a production setting.

The LX-20™ spray gun has been designed to replace conventional high pressure spray guns. It is available in gravity feed or pressure feed models. Fuji HVLP compressor spray guns are well known for higher transfer rates.

Especially suited to wood finishing and any fine-finishing application. The gun is compact and lightweight – easy to handle. The ergonomic design allows the spray gun to feel comfortable in the user’s hand for extended periods of time. The LX-20™ is also easy to operate employing the same familiar controls as any conventional spray gun.

The fan pattern control offers precise adjustment reducing overspray and waste. Fan pattern size is adjusted with a simple, yet effective side mounted control. At a spray distance of 8” the fan pattern size ranges up to 13”.

Fuji LX-20™ HVLP technology complies with environmental regulations for HVLP. The added benefit provides considerable savings in material compared to conventional high pressure spraying equipment. LX-20™ technology also allows for little to no dilution for most coatings. This allows for spraying finishes as per the manufacturer’s recommendation. The LX-20™ compressor spray gun offers the same benefits of HVLP as our turbine guns.

Quality

Most spray guns on the market install a stainless steel needle and nozzles. However, the fluid passages are often made of existing alloy gun material, which can corrode. The Fuji Spray® LX-20™ Spray Gun features 100% stainless steel fluid passages in the gun, suitable for water-borne and solvent-based coatings. The spray gun body features a durable chrome finish. It was designed for full system application: solvent-based basecoats, low VOC colours or clear coat.

HVLP versus MPX Technology

To qualify as HVLP, air flowing through the air cap must not exceed 10 psi. Generally speaking, the much lower velocity produces a softer, easier to control spray. This allows you to lay the paint on gently and not blast it on. Fuji MPX technology utilizes slightly more pressure than HVLP spray guns, achieving much faster application speed and higher atomization levels. The transfer efficiency rate is in excess of 65% and the quality of finish is equivalent to the best high-pressure spray finishes.

What’s In The Box

  • LX-20™ spray gun (pressure feed or gravity)
  • 2 extra air cap sets included (1.2mm & 1.7mm)
  • 600cc nylon gravity cup (optional & only applicable with gravity version)
  • High-pressure regulator gauge
  • Wrench
  • Cleaning brush
  • Manual

Variants

Gravity - 600cc Cup
6265G-LX-C-14K
$435.00 In stock
Pressure
6260P-LX-N-14K
$395.00 In stock

Specifications

Classification Spray Equipment / Spray Guns
Brand Fuji Spray
Sold Since May 1, 2020
Origin

Canada

Weight

502 g (17.7 oz)

Air Cap Set
Air Supply Pressure

26 psi at gun inlet (1.8 bar)

Air Consumption

15.2 cfm

Air Inlet Size

1/4" BSP and NPS

Recommended Airflow & Pressure

15.2 cfm at 26 psi

Similar Products

Complementary Products

Review

Ron Estabrook

So far so good

Ron Estabrook · Sep 29, 2021

Haven’t had much of a chance to use the spray gun yet. The quality and fit and finish seems excellent, for the price I wished it would of came in a case but not a deal breaker.
The shipping was fast, Ardec was amazing to deal with and I will continue to do business with this Canadian company.

          

Terms of Sales · Privacy · Cookies · En français